Local Buckling in Pressure Elements

I

Ismail Hakki Besler

Administrator
New Webinar : Local Buckling in Compression Elements with ideCAD. The design of compression elements and local buckling mechanism will be examined according to three regulations that can be designed with ideCAD, AISC 360-10, TÇY 2016 and TS EN 1993 - 1 - 1. You can ask questions after the lecture, which will be told live over the internet and will last for 45 minutes. When the webinar time comes, all you have to do is to watch the trainings by entering the web page we will give you. (The webinar is free to attend.) Watch the recorded video of the webinar:
You do not have permission to view link Log in or register now.
 
Re: Local Buckling Status in Pressure Elements with ideCAD I could not enter the previous Webinar. Can you give information about the application?
 
Re: Local Sprain Status in Compression Elements with ideCAD
"ahmet_divan":1sza564h" said:
Can you give me information about the webinar.
Click to expand...
"ahmet_divan":1sza564h" said:
I could not enter the previous Webinar . Could you give information about the application.
Click to expand...
Click on the registration link given in the message. Enter your first name, last name and e-mail. This way you will have registered. You will receive an e-mail. You will be able to access the webinar by clicking the link received via e-mail during the webinar time.
 
You must log in or register to reply here.
Back
Top