jacobian error

[bha]

Good day, ide structure, I have a few questions for you 1- In my attached file, I am a model consisting of the combination of 4 different structures, the reason why I did not solve it separately, if I divide the structure into 4 separate parts, I did not know how to affect the foundation of the whole structure on the foundation. A way to solve the structures separately and solve the foundation in one piece. Is there 2- I'm getting jacobian error I couldn't find where is wrong in the model, thanks in advance

You do not have permission to view link Log in or register now.

 

[Levent Özpak]

Good afternoon, I have a few questions for you about the ide structure. 1- I have a model consisting of the combination of 4 different structures in my attached file. Is there a way to solve the structures separately and solve the foundation in one piece

Hello, After you solve the blocks as separate projects, you can use the Get Fundamental Effects command under the Project menu to have these effects on the foundation you define in any of your projects. (In case of using the take basic effects command, a solution without superstructure interaction is required.)

2- I get a jacobian error, I couldn't detect where it is wrong in the model, thanks in advance

The findings about your project are as follows; (ground floor and 1st floor of the investigated floor) *There is no closed area on the D268 slab. (2nd block) *Connect the left slab edge of the D269 slab to K409 At the point where it ends, there is no nodal point on the beam at the same coordinate. * At the point where the floor edge of the D240 slab connects to K382, there is no nodal point on the beam at the same coordinate. *Joint point of beam K475 is not on K382. *A piece of beam remains at the intersection of beams K398-K478-K479. * There is no closed area on the D271 floor.(4th block) *S04-S05-S06-S07_S08-S09 columns on the N2 axis in the 3rd block from the left on the ground floor are not defined on the basement floor. *K83 beam is not connected to P105 curtain. *K269 beam does not connect to S69 column. *K117 beam is not connected to P43 curtain. *K231 beam does not connect to S121 column. *Beamless raft foundation should be defined to include all vertical carriers. Fixed on the floor. 1st floor was copied to other floors . Analysis can be done in the project. However, a general review of the project information would be appropriate.

You do not have permission to view link Log in or register now.

Note: It is recommended to have 16 Gb of computer memory for analysis according to semi-rigid diaphragm in the program. (In case of less ram, there may be memory shortage problem.) Good work.