Insufficient flooring or faulty flooring

[uğur taşdan]

I am getting the error of insufficient tiling or incorrect tiling, but the tiles mentioned by the program are not available. I wanted to delete the objects by using the Tools/Find Object command, but it didn't work, I would appreciate it if you could help.

 

[Levent Özpak]

I get the error of insufficient tiling or incorrect tiling, but the tiles mentioned by the program are not available. I wanted to select using the Tools/Find Object command and delete the objects, but it didn't work, I would appreciate it if you could help.

Hello, Run the "Geometry Check" command. In the dialog that opens, select the line "Insufficient tile or faulty tile axis". Click on the "Select Object" line. Click the plan window with the left mouse button. Press the "Delete" key on the keyboard. Incorrectly defined tile/tiles will be deleted. Good work

 

[uğur taşdan]

First of all, thank you sir. I've already done what you said a few times. I shared it on the forum.

 

[uğur taşdan]

All right, Mr. Levent, there was a point I missed. I did as you said. thank you. Do you think there is something I am doing wrong as a system? I will be glad if you share your opinion.

 

[unver]

Hello My suggestions; --Model the building as two floors, --Make the sitting tribune sloping, add steps while pouring concrete, --Remove the wall loads on the beams, --Take the building importance factor I=1.2, --Column sections can be 35x35. --The dimensions of the beams can also be reduced. Unver ÖZCAN

 

[uğur taşdan]

Thank you very much, sir.