Insufficient floor or faulty floor axis

B

brk5672

New Member
Good day, I am using idecad 8 demo. In the geometry control, it gives the error of Insufficient slab or faulty slab axis for the d10 slab. Oddly enough, there is no d10 slab in the project, how can we solve this? Is it a major mistake?
 
Hello --Important error --Check the geometry of that floor --Select the wrong tile with the select object under the geometry control --delete the tile Unver ÖZCAN
 
I did what you said, but here is the problem; I do not have a tile with the name specified by the program anyway, when I double-click on the error in the project, it redirects to an empty area, as you said there is nothing there, I pressed the select object button, the room did not work.
 
You can delete the [/u][/b] tile you learned the name of in the geometry control by selecting it (even if the object is not visible) using the Tools/Find Object command.
 
Hello --The forgotten PZ30 ground floor curtain has been added --The faulty floor axes in the geometry control have been deleted --1 and 17 axes curtains have been rearranged. .rar.html]http://www.dosya.tc/server9/u54yt2/UO.rar.html[/url]
 
Insufficient slab or faulty axle error I get such an error in the Db134 slab, but I don't have such a slab, I thought where the problem might be, I deleted the D54 tile and checked the geometry, it didn't give an error. ? [Url = https: //wetransfer.com/downloads/9c0c0255325b9f5b9cb630fc326e495b20190602094902/5dbbb2b9700f9b371308a7e99d4557c220190602094902/e51c9 to? Utm_campaign = general wt_email_tracking & utm_content = & utm_medium = download_butto's & utm_source = notify_recipient_email] https://wetransfer.com/downloads/9c0c02 ... ient_email [/ url]
 
Re: Insufficient slab or faulty axis Hello, The slab gap may be cutting your axes. You can try and slide the account axes so that they do not coincide with the gap. Good work. Sent from my SM-N960F using Tapatalk
 
Re: Insufficient flooring or faulty axis My account does not coincide with my axles, I do not understand where is the error
 
Re: Insufficient flooring or faulty axis I cannot look at your project because I am not near the computer. If you think the problem is with the floor space, you may not be able to define the floor space if your system is not a beamless slab and your space is small compared to the floor space. You can add it in the drawings. Good luck with. Sent from my SM-N960F using Tapatalk
 
Re: Insufficient flooring or faulty axis error Thank you, I fixed the error, select the object, I deleted it and it disappeared
 
I had the same problem, after checking the geometry, double-clicking on the wrong part, I deleted the place indicated by the program with the delete command even though the object was not visible, and the problem was solved.
 
You must log in or register to reply here.
Back
Top