I want to benefit from your experience in my first project work

K

kenangurler

New Member
I am someone who is trying to learn idecad. I did it according to the narration videos I followed, but there were a lot of mistakes. Before intervening with them, I would like to get solution suggestions from you, my experienced colleagues. My goal is to do the reasons knowing the reasons, instead of doing trial and error. I would be very happy if you
 
Re: I want to benefit from your experience in my first project work Hello If you press the F1 key on the keyboard E: Column does not provide maximum normal force control. (Ndmax> 0.5Acfck) Column sizes are insufficient. You can see that you need to enlarge the column sizes. Unver ÖZCAN
 
Re: I want to benefit from your experience in my first project work If you send the project, we can better understand and help you if the errors are caused by data entry problems or a carrier system design error.
 
Re: I want to benefit from your experience in my first project work Mr. Nyılmaz, I am working on the project from the demo, I wanted to upload it, but it was not a tube. I wonder if it doesn't allow to install as a demo
 
Re: I want to benefit from your experience in my first project work Unver, I actually saw this suggestion in the program, but what I really want is from experienced people like you, what kind of changes would be good to make the project ideal in every respect? Sometimes increasing the size, sometimes increasing the concrete class, such as increasing the reinforcement. But I could not load the project. I'm using a demo, is that why?
 
Re: I want to benefit from your experience in my first project work
"unver":3dje1dm2" said:
Hi If you press the F1 key on the keyboard E: Column does not provide maximum normal force control (Ndmax> 0.5Acfck) Column dimensions It seems insufficient. You can see that you need to enlarge the column dimensions Ünver ÖZCAN
Click to expand...
Unver, I actually saw this suggestion in the program, but my main request is from experienced people like you, what changes would be good to make the project ideal in every respect? Sometimes increasing the concrete class, such as increasing the reinforcement, but I couldn't load the project.
 
Re: I want to benefit from your experience in my first project work
"NYILMAZ":3cs0k4no" said:
If you send the project, we can better understand whether the errors are caused by data entry problems or a carrier system design error and we can help.[/quote ] firstly, you can compress it from within the program and send it in cde format. Secondly, you can upload it to one of the upload sites and share the link here. N. YILMAZ
Click to expand...
 
Re: I want to benefit from your experience in my first project work Hello, It gives a virus warning. You can upload your project to the link below.
You do not have permission to view link Log in or register now.
 
Re: I want to benefit from your experience in my first project work Hello The same project was previously
You do not have permission to view link Log in or register now.
was asked in this link, questions were answered. Unver ÖZCAN
 
Re: I want to benefit from your experience in my first project work
"unver":hu0pb2np" said:
Hello Same project before
You do not have permission to view link Log in or register now.
asked in this link, questions answered Unver ÖZCAN
Click to expand...
Unver, I have a few questions, excuse me. -How should the thickness of the foundation be increased and how should this process be done? -I have it marked according to the average tension, but you don't, what is the difference? You wrote the following for this project before. message by unver » 19 Aug 2018, 12:07 Hello My Suggestions : --1. Remove the not rigid ticks of the basement --Your floor safety must be approximately 23 t/m2 for G+Q+EY2 loading to recover the ground safety, --Rat thickness should be slightly increased in a 16-storey building, --Ticks in the columns should be removed, -- Correct the incorrect column placement in the geometry control, Corrected project is attached. Calculate and check. Unve r ÖZCAN --1. Where are the ticks when you say that the basement is not rigid, remove the ticks? --Which ticks in the columns should be removed?
 
Re: I want to benefit from your experience in my first project work The answers to these questions are in the project I fixed before. My humble advice to you is that by carefully examining the training videos about project construction in this forum, by doing the same with those projects, to learn the theory, logic, usage and intricacies of the program, to examine the answers given to the questions in the forum about version 8, and then make a project. Unver ÖZCAN
 
Re: I want to benefit from your experience in my first project work thank you for your help, Mr. Ünver, I know I asked a little too many questions :) I watched ide's own videos and videos of another course, but when there are conflicting situations (confusing me), I can't help learning it. Since my first profession is teaching, I think I work with such a logic :)
 
You must log in or register to reply here.
Back
Top