I'm having a problem with stapling on a stepped base

celikus

New Member
In the project I put the link of, it was necessary to build a closed area for parking in the backyard on the 1st basement floor. I made the solution as you can see in the project, but I'm having a stapling problem on a step-by-step basis. Is there an error for data entry? It is also strange because it does stapling verification in S1 and S3 and not in S2. thank you
You do not have permission to view link Log in or register now.
STEEL_8358-1_BAP_KONTROL.ide7.html
 
Re: Stapling problem Hello, S1, S2, S3 columns and P1 curtain are outside the raft foundation boundary on the 1st basement floor. They connect to the main foundation in the second basement. If you think that these elements should be connected to the foundation on the 1st basement floor. Extend the foundation boundary to include the columns. If you do not want to connect these elements to the 1st basement floor foundation. Shift the raft foundation boundary so that it does not touch the columns. I think my advice would be to separate the part you modeled as a parking lot from the building with dilatation. Additional columns will be required for the dilation boundary.
 
Re: Stapling problem
"YasinTezel":3bk1tns3" said:
Hi, Columns S1,S2,S3 and curtain P1 are outside the raft foundation boundary in the 1st basement floor. They are connected to the main foundation in the 2nd basement floor. If you think that these elements should be connected to the foundation on the 1st basement floor. Extend the foundation boundary to cover the columns. If you do not want to connect these elements to the 1st basement floor foundation. Shift the raft foundation boundary so that it does not touch the columns. I think you should separate the part you modeled as a car park from the building with dilatation. Dilatation boundary Additional columns will be required for this.
Thank you Mr. Yasin. I cannot put dilatation, because additional columns are needed, there is a problem at the entrance of the car park.
 
Back
Top