How Can I Transfer Stair Loads to Beams?

[insaat_muh]

I read in the user book that ladder analysis can be done but loads are not transferred to the system, but how can we transfer loads?

 

[insaat_muh]

Why is the forum official not responding to our question?

 

[HakanŞahin]

Hello, You can give the ladder loads to the system with general load definitions. loads; If you are going to give it to the floor, as a linear load or if the load is point, as a point load; If you are going to give the beam, by adding the fixed load to the wall in the beam settings, the live load to the live load line or by using one of the user-defined loads in the structure tree; If you are going to give it to the panel, by defining a user-defined load in the structure tree, provided that the panel is unwound; you can give the system... Good work;

 

[insaat_muh]

Hakan, yes, we can enter the shape manually, where do we get the values? Or will we calculate it ourselves?

 

[Bolvadinim]

Yes, we will calculate the stair loads ourselves.

 

[insaat_muh]

Yes, we will calculate the stair loads ourselves..

The loads on the beams can be calculated by calculating the live and fixed loads, but maybe a more realistic calculation in the ladder calculation, such as dynamic loads etc. I want to take advantage of it if we can get it, I'm really after it

 

[Bolvadinim]

By calculating the moving and fixed loads and the loads on the beams, the loads on the beams can be calculated, but maybe if we can get the values on the supports in the form of data with a more realistic calculation in the ladder calculation, for example dynamic loads etc., I want to make use of it, I am really after it

Dear insaat_muh' si What type of ladder are you trying to calculate?

 

[insaat_muh]

Two-armed double landing, one rectangular and one L.