How can I arrange curvilinear tiles in a continuous state

I

ibrahimgokdemir

New Member
Hello friends, I am drawing the attached drawing for trial. This is a building that I have built before. I arranged the floor and beams as curves with the help I got from idecad. How can I arrange these tiles in a continuous state? According to Tse500 11.2.2 it does not save the ratio of the free opening. Is there a possibility to make and run the curtains as they are on the base? Thanks.
 
Hi, -In the project you added, the sloping floors are not connected to the beams. -After modeling the slab and beams as flat, you can edit them as curved with the "Bevel Objects" command in the Tile assistant toolbar. Sample project is attached. -Connect the beams connected to the curtains in the rigid direction from the end points of the curtains. -You can arrange the slab and beam reinforcements using the two-dimensional possibilities after taking the drawing. -There is no possibility to define inclined curtains in space. -In some regions, it would be appropriate to model the elements that do not provide the -1/7 ratio with overlapping slab edges defined as columns. Good work
 
You must log in or register to reply here.
Back
Top