Geometry and Analysis Errors

S

serdagi

New Member
Hello, there are gradual raft foundations in the project I have attached. I found threads on how to apply staggered raft foundations in other topics in the forum and I applied it in my project, but I could not fix the geometry control errors and analysis errors. I wish you good work.
 
Hi, the corrected project is attached. There are 3 (B) errors, you should fix them by considering the architectural project. Unver ÖZCAN
 
Dear Unver; Thank you for your interest. There is one more thing on my mind. How are we going to connect the foundations at the upper level to the foundation at the lower level? I made a 70 cm curtain, but there are columns coming out from below. Shouldn't they start from the top of the curtain? It looks like we are dilating now. good work
 
Hello Right, left and middle foundations are solved together. For reinforcement connections, extend the reinforcements of the right and left foundations on the 70 cm curtains. It will be connected with the raft foundation reinforcement at -270 cm elevation at the bottom and the raft foundation reinforcement at +50 cm elevation at the top. After making calculations in the program, all calculation outputs and drawings should be checked. You may have made a data entry error where you least expected it, or there may be an inappropriate detail. Unver ÖZCAN
 
You must log in or register to reply here.
Back
Top