Error loading modal after copying fold

[lilahmiharbi]

There is a basement + ground + 5 storey construction. When I draw the basement + ground floor plan and have it analyzed, there is no problem, but when I add 5 floors on the floor and have an analysis done, I encounter the error "The system cannot be resolved in modal analysis". There does not appear to be an error in the geometry control, so there is no problem in basement and ground analysis anyway. I would appreciate it if you could review the file and help. Error uploading because the file size is large. you can download it from here.

You do not have permission to view link Log in or register now.

 

[HakanŞahin]

I have a construction in Bodrum + Ground + 5 floors. When I draw the basement + Ground floor plan and have it analyzed, there is no problem, but when I add 5 floors on the floor and have the analysis done, I encounter the error "The system cannot be resolved in modal analysis. In geometry control there is no error, there is no problem in basement and ground analysis anyway. I would appreciate it if you could examine the file and help.

Hello, The coordinates of the wrong node point in the model are reported to you on the analysis notification screen. When we examine the data entry in the coordinates given by the program, 7 versions of the beam-beam junction data We see that it is not done correctly according to the entry rules. There is a piece of beam under the beam-beam intersection. When you correct it, you will be able to analyze. K63 is defined from the top, K92 from the bottom, define both from the top and delete the piece beam, divide the beam in the other direction so that it coincides with the K63-K92 node . Good work