German 
French 
Spanish 
Portuguese 
Italian 
Arabic 
Russian 
Japanese 
Turkish After v10.09 and 10.17, I'm getting an EA error on some tiles. For example, when the floor should be flat+pillar in bidirectional short direction, I get an EA error or when console flooring should have console reinforcement, I still get the same error. Have you encountered such a problem?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
EA (double reinforcement) error in slabs
- Thread starter TheBEaST
- Start date
Levent Özpak
New Member
Double reinforcement (EA) warning in slabs may be caused by analysis according to "Consider in-plane forces in slab design" option in Semi-rigid diaphragm method in Analysis Settings. If this option is not checked, slab meshes are formed incorrectly. In this case, if you add your project, we will review it."TheBEaST":2n5ownxf" said:v10.09 and after 10.17 I am getting EA error on some slabs. For example, I get an EA error when the slab should be flat+pile in bidirectional short direction, or I get the same error when console slab should have console reinforcement. Has anyone encountered such a problem?
Hello Mr. Levent, I am getting double reinforcement error on different floors on floors created by copying. In the semi-rigid diaphragm method, I analyze according to the "Consider in-plane forces in slab design" option. I am sending the file without saving after analysis. Thanks Good work.
Levent Özpak
New Member
Hello, You can edit slab reinforcements as top + bottom flat reinforcement with "Reinforced Concrete Calculation Axis Edit" command. Note: There is no curtain in the y direction in the project. The "Apply 4/5R" line for the y direction in the analysis settings does not need to be checked. Good work"hilmicura":1c8l691d" said:Hello, Mr. Levent, I am getting double reinforcement error in different floors on floors created by copying. I am analyzing according to the option of "Take into account in-plane forces in slab design" in semi-rigid diaphragm method. I am sending the file without saving after analysis. Thanks Good work.
yes, the reinforced concrete calculation axis can be corrected as reinforcement at the top and bottom in the edit section, but in v.10.09, we want double reinforcement in some of the floors that do not want double reinforcement, or if we do not want double reinforcement in one of the floors, we want double reinforcement in the same slab on the other floor. definitely the problem is caused by v10.17
sahinsukru
New Member
"TheBEaST":1va7cnqn" said:yes, the reinforced concrete calculation axis can be corrected as reinforcement at the top and bottom in the edit section, but in v.10.09, we want double reinforcement in v10.17 for some of the slabs that do not want double reinforcement, or if we do not want double reinforcement on one floor, double reinforcement on the same slab is placed on the other floor. definitely the problem is with v10.17
You do not have permission to view link
Log in or register now.