German 
French 
Spanish 
Portuguese 
Italian 
Arabic 
Russian 
Japanese 
Turkish You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
drawing problem
- Thread starter ryildiz
- Start date
Levent Özpak
New Member
Hello, The problem is in our case notes about the drawing that occurs in the beams connected to the inclined columns in the horizontal direction. (No problem with the analysis model) Thank you for your report. Proposal; After fixing the reinforcements of the relevant beams in the Reinforced Concrete dialog, move the beams and their connected columns to another project with the "copy to file" and "paste from file" command. Make the columns perpendicular and take the beam expansions. Move the beam details to your project with the "copy to file" and "paste from file" commands. Good work
"Levent Özpak":2ixzxg93" said:Hi, The problem is in our notes regarding the drawing of beams connected horizontally to inclined columns. (There is no problem in the analysis model) Thank you for your report. Move the beams and their connected columns to another project with the "copy to file" and "paste from file" command. Make the columns perpendicular and get the beam expansions. Move the beam details to your project again with the "copy to file" and "paste from file" commands. Good work[/ quote] THANKS