Drawing Issue

[serdagi]

Hello, 10Q26 reinforcement was selected in the attached project with post-analysis editing. However, when I get the drawing of the column application plan, 8Q26 appears in the drawing while writing 10Q26 in text. No reinforcement is visible in the middle in the horizontal direction. Can we interfere with the design of multiple stirrups, I want a plus-shaped stirrup layout, but the program makes a different design. good work everyone

 

[Levent Özpak]

Hello, 10Q26 reinforcement was chosen with the post-analysis editing in the attached project. However, when I took the drawing of the column application plan, 8Q26 appears in the drawing while writing 10Q26 in text. No reinforcement is visible in the middle in the horizontal direction.

Hello, -The column the number of major and minor reinforcements are arranged as odd numbers as 5fi26+5fi26. For example, arrange 8fi26+2fi26 as an even number.

Can we also intervene in the multi-stirrup design, I want a plus-shaped stirrup layout, but the program is different. designs.

-Multiple stirrup design is determined automatically based on the dimensions of the column and the number of vertical reinforcements In cases where a double stirrup design is not made in the column, cross-ties are designed according to the regulations. There is no possibility of intervention. Good work