Double Dilatation Structure

[AUGURD]

Hello, I am designing a structure independent from each other, with 3 blocks of double dilatation rafts, z+2 housing 13.05 building height. I left 15 cm dilatation and designed a single floor. My right and left blocks are extremely rigid. I don't have any displacement problems, but the middle block is subject to a lot of displacement, but the size and designs are almost the same. If you look at the modal deformations, you can understand why, I couldn't understand what kind of solution I need to come up with. It is easier for me to draw all the blocks in one project. Thank you in advance for the good work. Working Link:

You do not have permission to view link Log in or register now.

 

[Levent Özpak]

Hi, I think you just reviewed the 1st mod. Mode 1 is active on the aperture in the middle block. If you examine other mods, you can see that there are similar behaviors in other blocks. In addition, the displacement values calculated for each mode in the dynamic analysis are pseudo displacements. Their values mean nothing. Selection of structural system type of buildings, curtain tilting controls, rigid floor definitions, etc. In terms of regulation controls, it would be appropriate to analyze the dilatations in separate project files.