Deflection error in rib flooring

M

m.mühendis

New Member
HI, WHAT I DID IN THE ATTACHED FILE, I CANNOT FIX THE DEPLOYMENT ERRORS ON THE N10 FLOOR. IT ONLY APPEARS IN THE REPORT, NO DEFECTS ON THE REINFORCEMENT FLOOR AND THE RIBBON SECTION.
 
mrb First of all, I would like to state that the project was drawn in ide 8.5 according to the 2007 regulation. If there is no special reason, the calculation should be made according to the 2018 regulation in ide 10 because there are many changes in the way of making hollow blocks.
 
You must log in or register to reply here.
Back
Top