deflection control

Hello, I don't understand what you expect us or ideCAD officials to understand just by looking at this image. Please ask for your assistance request in a reasonable manner. You must share this data so that the model can be checked for an error in the report.
 
ideCAD checks Beams and Slabs for Deflection. If you must ask what sx is, ask the person who asks it. None If you are asking what is AlfaSx, check the earthquake regulations. Also check out Alpha S related places on the Forum: Click the link below
You do not have permission to view link Log in or register now.
 
Hello, 1-The effective ground acceleration coefficient is 0.39. It should be 0.40 in the 1st degree earthquake zone. Tdy 2007 table2.2. If the Defined A0 option is not selected and the Earthquake zone 1st zone is selected, the effective ground acceleration coefficient is automatically taken as 0.40. 2-As there is no curtain in the X direction in the carrier system, the AlfaSx value is not printed. 3-Deflection values and limit values are printed from the Beam Deflection and Crack Control report.
 
You must log in or register to reply here.
Back
Top