Cut safety on curtains

[LEYLA YÜKSEL]

THE PROJECT HAS CUTTING SECURITY AND CURTAINS THAT GIVEN STAPLING ERROR CONCRETE CLASS CROSS-ROAD AND REINFORCEMENT INCREASING IS NOT A SOLUTION I WANT YOUR URGENT HELP... THANK YOU.

 

[goose]

Re: CUTTING SAFETY ON SCREENS It is not helpful to increase the concrete class and reinforcement of the curtain for the punching error. You need to increase the thickness of the floor or use punching reinforcement if it does not save a little.

 

[Levent Özpak]

Re: CUTTING SAFETY ON CURTAINS

THE PROJECT HAS CUT SAFETY AND CURTAINS THAT GAVE PUNCHING FAILURE CONCRETE CLASS CROSS-SECTION AND REINFORCEMENT INCREASING CANNOT BE A SOLUTION... .

-You can review the documents linked below about the curtain shear safety problem and possible solutions:

You do not have permission to view link Log in or register now.

You do not have permission to view link Log in or register now.

-You can check the link below for raft stapling problem and possible solutions.

You do not have permission to view link Log in or register now.

Frequently Asked Questions and Answers document for the solution of column-beam joint shear safety problems, item 9 can be examined

You do not have permission to view link Log in or register now.

Project notes; -P23-P24-P25 u-shaped elevator curtains should be defined as group curtains. -I recommend entering zero tolerance values for calculation reinforcement and section control in Analysis Settings. Good work