curtain window design

M

murat mungan

New Member
I need to show 100x130 windows in the basement, and I still need to leave window space inside the curtain. It is possible to set three separate curtains or multiple curtains between an axle on the right, left and bottom of the window (by changing the level of the curtain under the window) between that axle.
 
"saridurmus":34tqit6d" said:
YOU CAN LEAVE ANY SPACE INSIDE THE CURTAIN BY USING THE DOOR/WINDOW COMMAND
Click to expand...
my esteemed colleague I couldn't find the door and window commands, do you need a library update, I wonder how?
 
"murat mungan":1f6176wb" said:
value colleague, I couldn't find the door and window commands. Do you need a library update, I wonder how?
Click to expand...
If the version you are using is 6.2007, this is the latest version and you do not need to update. Click the /formwork plan icon to switch to the basic mode. In this mode, the door/window command will be active in the toolbar. Go to the door/window settings, select the desired size door/window element and place it in the desired position on the panel...
"murat mungan":1f6176wb" said:
model as shell, finite element width etc. are you talking about this, Mr. Hakan .
Click to expand...
Confirm that Model as shell option is selected in the static/reinforced concrete tab of the curtain settings..
 
You must log in or register to reply here.
Back
Top