German 
French 
Spanish 
Portuguese 
Italian 
Arabic 
Russian 
Japanese 
Turkish Hello, When I look at the reinforcement drawings of the gaps of the curtains for the door in my project, I see that the vertical reinforcements are arranged properly, but the horizontal (stirrup) reinforcements continue as if the door opening is uphill. I have attached the image below. In these regions, the column creates a single pose that continues along the entire height in the application plan. In my second question, I couldn't understand why the stirrups, which were on the left side of the door, were placed on their own. Thanks
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Curtain Reinforcement Openings Problems in Door Areas
- Thread starter kyuceturk
- Start date
You do not have permission to view link
Log in or register now.
Levent Özpak
New Member
Hello, Door/window gaps coincide with the location of the curtain end regions. It is not foreseen that there will be gaps in the curtain end regions."kyuceturk":qw5xj4g5" said:Hello, When I look at the reinforcement drawings of the gaps of the curtains for the door in my project, I see that the vertical reinforcements are arranged properly, but the horizontal (stirrup) reinforcements continue as if the door opening is uphill. I have added the image below. It creates a single pose that continues along the entire height in the plan.
This situation occurs in curtain-curtain combinations. It is recorded in our notes. I will suggest you to edit using 2D possibilities. Good work"kyuceturk":qw5xj4g5" said:Second In one of my questions, I couldn't understand why the stirrups, which are still on the left side of the door, which appear in the screenshot, are placed on their own.