Curtain Icon in Different Geometry..

B

Bolvadinim

New Member
Hello, Dear ideyapı officials, There was such an option in the previous version when we clicked on the curtain icon for the definition of one-piece or multi-part circular, curvilinear, arc and serpentine curtains. These options were removed in the 60051 version.. It was needed, but we couldn't find it... I wonder why this feature was removed? While it's been removed, we want it to be returned with the following features. By defining multi-part circular, curvilinear, arc and serpentine curtains, by opening free spaces in various shapes on the curtain (such as the route command, which is a space tool used in floors), these spaces are taken into account in the calculation and the gap contour is shown in the curtain reinforcement details, different elevations are given to the upper ends of the curtains and inclined curtains are formed. The attached photo actually tells about these things. good work...
 
I have 1 request about the curtain that I would like to add. The possibility of making CURTAINS FOR THE PARKING RAMP by giving different levels to the LOWER ends of the curtains, and of course the sloping tie-beam and continuous foundation that will come under this curtain.
 
It would be nice if there was a difference in both the lower and upper elevations of the curtain. Also why was the feature on the screen removed? Even if he made a wrong drawing, we were correcting him. When will this feature come?
 
Determine the route you want with the Path command and draw your serpentine curtain on this route using the curtain command. For circle and arc pitch, use the convert to pitch command.
 
"Ismail Hakki Feeds":ceh379k9" said:
Determine the route you want with the path command and draw your serpentine pitch on this route using the pitch command. Use the convert to pitch command for circle and arc pitches.
Click to expand...
I tried this method, what comes up when I say convert A menu appeared as in the picture below. When I said convert, it was polygon to column, polygonal to cross section.. The result did not change for me.. If what you are describing is to draw the screen partly on the curved path as in the picture below, it was always possible to do it this way anyway.. We mean it. This is not what we mean. You probably understand what we mean.. We are waiting for your answer regarding our other questions, Mr. Ismail.
"Bolvadinim":ceh379k9" said:
Hello, Dear ideyapı officials, One-piece or multi-piece circular, curvilinear, arc and There was such an option in the previous version when we clicked the curtain icon for the serpentine curtain definition. These options were removed in the 60051 version.. It was needed, but we couldn't find it... I wonder why this feature was removed? While it's been removed, we want it to be returned with the following features. By defining multi-part circular, curvilinear, arc and serpentine curtains, by opening free spaces in various shapes on the curtain (such as the route command, which is a space tool used in floors), these spaces are taken into account in the calculation and the gap contour is shown in the curtain reinforcement details, different elevations are given to the upper ends of the curtains and inclined curtains are formed. The attached photo actually tells about these things. good work...
Click to expand...
 
The drawing of curved curtains is not in the program. This and similar requests, your forum "What would you like to have in ideCAD Static?" Continue to enter. viewtopic.php?f=5&t=33 I wish you success in your work. İsmail Hakkı Besler
 
You must log in or register to reply here.
Back
Top