curtain cutting

[kasky]

In the project I added 3 . I am constantly getting curtain cutting error on the basement floor and what should I buy for the movable load and fixed load on the raft foundation (there is no vehicle load on it, there is no earth load on it, it is correct to take the values to zero) if the two curtain column break points on the floors are not correct, how can I fix it, thank you url=https://hotfile.com/dl/153930858/109d7c4/PERDE.rar.html]https://hotfile.com/dl/153930858/109d7c4/PERDE.rar.html[/url]

 

[Levent Özpak]

*The cutting problem in P04 Shear is due to the fact that the stirrup reinforcement diameter is not selected. In the reinforcement selection dialog, if 12 and 14 rebars with curtain stirrup reinforcement diameter are marked and analyzed, the problem is solved. The cutting problem in the P07 curtain stems from both the inability to throw the necessary stirrup and the failure to meet the 0.22*Ac*Fcd condition in the regulation. In this case, the wall section should be enlarged or the carrier system should be arranged to reduce the shearing force on the curtain. *There is no problem in the combination of curtain-column-beam.