copy fold

[gürkan]

SA good work I am copying floors in my project but columns are not being copied. I've inspected the layers, there seems to be no problem. I will be glad if you help me. I am sending the project

 

[HakanŞahin]

Hello, In the default setting of newly opened floors, the column layer remains closed. 1. Unfold the floors. 2. Move to any vacant floor. 3. Enter the layer settings. There, tick the line "Apply to all Drawings". 4. Open the column layer. 5. Switch the floor to which you will copy and make a copy. ---- Also, I noticed that there is dilatation in your project. In version 5, you cannot solve dilated structures together in the same project file. You must resolve each dilation as separate projects. Good work...

 

[gürkan]

I solved this project with the aim of trying it, it didn't give any problem on any side of the project. is it okay

 

[gürkan]

In the project related to this project, I need to reduce some slabs to half the length of the column and I need to define a level half lower than the upper level of the column on the top floor. Is this a problem?

 

[HakanŞahin]

I solved this project with the aim of testing it, it didn't give any problem to any side of the project. is there any problem

The earthquake effects should be calculated separately for each dilatation and effected on their own rigid diaphragms. He solved the project incorrectly ( (for 5 version)

In the project related to this project, I need to reduce some slabs to half the length of the column and I need to define a level half lower than the upper level of the column on the top floor. mu ?

No it won't ... Define the floor mass with different elevation as a separate floor. Select the columns that coincide with the level of that floor and are not dependent on that floor (passing that floor) and define them as "free-top columns".