column reinforcements

[ibrahimhalilaydoğan]

HAVE A NICE DAY. I am designing a ground + 3 storey building.. It is not a mistake to have more reinforcement on the upper floor than the lower column.. If this is a mistake, how can we solve it .. There is also a situation where there is more output from the upper floor on the lower floor (for the column).

You do not have permission to view link Log in or register now.

 

[Levent Özpak]

Hello, Columns and curtains are designed according to the effects of the combination that will produce the largest reinforcement. Due to the load-bearing system, the reinforcement on the lower floor may rise more than the upper floor. When such a situation is encountered, an arrangement can be made in the column reinforced concrete dialog so that the reinforcement on the lower floor is the same as the upper floor. In case of more reinforcement on the upper floor, no arrangement is required under normal conditions. Note: Some of your columns have a B (column beam connection security) problem. The attached combination.pdf document for troubleshooting issue B may be helpful. Good work

 

[ibrahimhalilaydoğan]

So we don't have an automatic routing that will provide the same number and order of reinforcements on all floors of the column? if we want to fix this one by one?

 

[HakanŞahin]

we don't have an automatic routing that will provide the same number and order of reinforcements on all floors of the column. 3. Select all floors 4. With the Ctrl+shift key pressed, select all the columns listed in the dialog and type the reinforcement you have determined into the major and minor cells. 5. All the columns you have selected will automatically be the same as the reinforcement you have given. Also apply for columns.