Changing Stirrup-Sticker Placement in Columns and Beams

B

BurakErbay61

New Member
Good afternoon, good forums. I am a civil engineering final year student, I am using the demo version of your program for my finishing work, but I encountered a problem and I am asking for your help in this regard. In order to make the necessary comparisons, I want to make the longitudinal reinforcement stirrups and crossties of the columns I have shown in the photo as in the second image, I can change the longitudinal reinforcements, but I cannot place the stirrups and crossties as I want, how can I do this, I want to change the stirrups in the beams, is there a chance to explain them? Thank you and have a nice day.
 
Re: Changing the Placement of Stirrups - Crossties in Columns and Beams Hello, TBDY 2018 article 7.3.4 According to Figure 7.3, the distance between stirrup arms and crossties cannot be taken larger than 25 times the diameter of the stirrup. The distance between Stirrups and Ticks is determined automatically. It is necessary to use larger stirrup diameters in order to increase the cross-ties spacing. Column stirrup spacings can be changed by double-clicking on the reinforcement column. Good work
 
You must log in or register to reply here.
Back
Top