Cassette Flooring

[serdagi]

Hello, because the file size is large, I chose cassette tiling because I used wide aperture in my work that I sent with wetransfer. However, when I define a stud beam from the beams forming one side of the cassette floor, I get a geometry error as "the beam height requirement is not met in the beamed floor". But it doesn't give such a warning when the stub beam is deleted. I'm asking for solutions to the problem. download link:

You do not have permission to view link Log in or register now.

 

[unver]

Hello. Change the Y direction calculation axis of the cassette floors, (slide to the right or left.) Have the modal analysis done with the RITZ method. Unver ÖZCAN

 

[serdagi]

Thank you Mr. Unver. The problem was solved when I did as you said and deleted the tile and redefined it.