In the report, when the beam is not connected to the rigid diaphragm, " It is normal for the same reinforcements to come out as a result of writing "not connected to the rigid diaphragm" and being connected/not connected..."cem_kucuk569":198xxam2 " said:The report also writes that beams are not connected to the rigid diaphragm in a beam in the beam section. There is a ventilation gap, it gives the same reinforcements when the gap is left next to the beam. Is this an important thing ???????
"cem_kucuk569":2ad5oq2v " said:there is a 175 cm ventilation gap along the beam. The beam is already connected to the 3 meters 1.25 cm floor beam, the reinforcement on the floor is piled and the flat reinforcement overlaps the beam at the part where there is no gap
No problem. Floor reinforcements will be cut in the gap, and the reinforcements that do not coincide with the gap will extend up to the beam. In the slab gap, gap reinforcement will be placed on the gap edges. Note: You do not need to open a topic with a different topic to ask a question. We can track the messages you send. Other threads will be deleted due to question duplication..."cem_kucuk569":2ad5oq2v" said:does not pose any problem twill
You may not be able to upload it because the file size is large. Try to download your project to a single floor, save it with the zip save option from the Project menu and add the file with the cde extension."cem_kucuk569":nhmauo5z" said:I can't upload the project because my internet is bad
German 
French 
Spanish 
Portuguese 
Italian 
Arabic 
Russian 
Japanese 
Turkish