Beam Wall Load Library

[Protas]

Hello, I'm a user of Idestatic v8.62. In the load library, when defining the beam load, I get the result that I have shown below. I don't understand why the linear load values come out like this... I would also make a suggestion... It would be very convenient if the beam load name could be copied. If a "Copy" button is placed next to the "New" and "Delete" buttons, similar load types can be created more easily for a beam load type that we have made once, without having to define the load layer each time. Desired changes on the copy, thickness, density etc. easily done. Good work....

 

[Levent Özpak]

Hi, I'm a user of Idestatic v8.62. While defining beam load in load library, I get the result shown below. I don't understand why linear load values come out like this...

Hello, in load library and There is a problem with the display of the Linear Load value in the load analysis report and it is among our notes. There is no problem with the load calculations.

I would also suggest... It would be very helpful if the beam load name could be copied. If a "Copy" button is placed next to the "New" and "Delete" buttons, similar load types can be created more easily for a beam load type that we have made once, without having to define the load layer each time. Desired changes on the copy, thickness, density etc. easily done.

Your request has been included in our notes for consideration. Good work

 

[NYILMAZ]

Hi, I had a suggestion... It would be great if the beam load name could be copied. If a "Copy" button is placed next to the "New" and "Delete" buttons, a beam load that we made once Similar load types are created more easily for the type of load, there is no need to define load layers every time. Any desired changes can be made on the copy, such as thickness, density, etc. Good work....

To inform you that I agree with this proposal and have requested it before Here, in addition, it should be possible to archive and re-use the new load created on a project. Note: There should be an easier method than the template project. We should not have to renew the template project every time.