German 
French 
Spanish 
Portuguese 
Italian 
Arabic 
Russian 
Japanese 
Turkish Hello friends, there is a beam stuck in the curtain in my project. No matter what I do, the safety of slipping is not ensured. I enlarge the section, lay it down, lift it, whatever I did, it did not work. It is my dream at night, please someone help me. I could not solve the tiny 5-storey place. /s3.dosya.tc/server28/SGIKzO/ibrahimyavassonhali.rar.html]http://s3.dosya.tc/server28/SGIKzO/ibra ... i.rar.html[/url]
Beam Slip Safety Not Provided.
- Thread starter unlboss
- Start date
It saves as attached. Because I can't see the architecture, I can't play as I wish. The beam is forced and short beam is formed. [email protected] I'll be as helpful as I can
Solve your project with a semi-rigid diaphragm. 1- You are using 30 cm thick beams in a 6-storey building in the 1st degree earthquake zone. I do not recommend. 2- You can reduce the attic floor and beam loads. 3- Include the ladder loads in the system. 4- Make the beams K124 and 127 the same as the widths of 131 and 116, I say by name on the ground floor. (provide reinforcement continuity) 5- Change the direction of K131 beam with change/object edit/beam-teel/set beam basic direction command. 6- You can make the K119 beam horizontal and connect it with a similar beam from the other curtain. 7- As far as I understand, the two sides are adjacent order. You can put a curtain on the exterior of the bathroom. 8- Solve the foundation interactively with the superstructure. 9- Do not unnecessarily enlarge your foundation ampatmans. (for example, reduce the bottom and top by 30 cm) Extra: 10- As I understand it, the two sides are adjacent. You can put curtains on the exterior of the bathroom. (If you want, you can slide this curtain upwards) Accordingly, you can connect the K130 beam to the curtain in a completely horizontal way with 50 cm offset. This also allows you to download WC and bathroom fittings between the ribs. (In the curved beam design you have made, the beam passes completely over the wc stone.) 11- You can close the other side of the elevator curtain as a curtain as the curtain you have made is symmetrical. You can make the S107 column square 40/40. Architecturally it looks better too. 12- Pay attention to the geometry control. Check out other topics. I am sending an attached work. Good luck with.
