Beam expansions clutter

[muhsin34]

DETAILED DRAWINGS OF BEAMS INCREDIBLY MIXED LOTS OF REINFORCEMENT AND LAYER POSTINGS VERY DISTRACTIVE WRITTEN PLACEMENTS IN GENERAL MOST DIFFICULT PIECES IN BEAMS AND MUCH AWAY FROM AUTHORIZED INSTRUCTIONS. THE SAME PROBLEM IS IN MOLD PLANS, THE QUANTITIES AND LENGTH OF THE FLOOR REINFORCEMENT ARE GIVEN AS SEPARATE TEXT. IF IT IS GIVEN AS ONE PIECE, IT IS MORE COMFORTABLE TO DRAW IT. RIBBON FLOORING CRACKS ON THE TOP OF THE SREBAR SREPARLA Q18MA D8/I.

 

[muhsin34]

I DON'T KNOW ANYTHING FROM THIS REINFORCEMENT, IF EVERY BEAM HAS REINFORCEMENT IN THIS WAY, IT WILL BE MORE COMFORTABLE TO DRAW IT BY HANDS

 

[YasinTezel]

Hello,

BEAM DETAIL DRAWINGS ARE INCREDIBLY MIXED LOTS OF REINFORCEMENTS AND LAYER TEXTS ARE VERY DISRUPTABLE WRITTEN PLACEMENTS IN GENERAL, A VERY STRUCTURED PICTURE IN GENERAL BEAMS THE SAME PROBLEM IS IN MOLD PLANS THE QUANTITIES AND LENGTH OF THE FLOOR REINFORCEMENT ARE GIVEN AS SEPARATE TEXT, IF IT IS GIVEN AS A SINGLE PIECE, IT WILL BE MORE EASY TO DRAW

I will also forward your suggestion to write the articles written on the reinforcement together,

UPPER DISTRIBUTION REINFORCEMENTS ON NERVE FLOORINGS PERMANENTLY Q8/18 FALLING REASON ?

Distribution equipment is automatically selected Ø8/18. If you want, diameter and spacing can be changed from the Reinforced Concrete Rib or Cassette dialog.

 

[muhsin34]

IF THE WRITINGS ARE SUBMITTED SEPARATELY, IT CAUSES AN INCREDIBLE MASSION, AT LEAST IT WOULD EASE OUR WORK A LITTLE IF THE WRITINGS ARE COMBINED ON THE BEAM AND THE MOLD

 

[muhsin34]

You do not have permission to view link Log in or register now.

 

[HakanŞahin]

https://drive.google.com/file/d/0BwBnxThMS-l5YTA2U3JSSUJsb00/view?usp=sharing IF YOU PRINT THE BEAMS OF THIS PROJECT, YOU'LL UNDERSTAND WHAT I WANT TO MEAN I DON'T KNOW SOMETHING FROM REINFORCEMENT, IT WOULD BE MORE COMFORTABLE TO DRAW THE BEAM HANDS IF EACH BEAM HAS REINFORCEMENT IN THIS WAY

Hello, The assembly in two adjacent openings coincided with each other. Set the value of "Allocation between reinforcements" in the beam expansions settings to 12 cm instead of 15 cm. If you change it, the mounting hardware will not coincide with the top After the value is 12 cm: Good work