balcony drawing help

[izmirlimuhendis]

In the example I sent, I want to grass the balcony I drew by defining two different floors in the building, which is actually a single floor, by defining a single floor, but I can't do it, I would appreciate it if you could help me.

 

[Levent Özpak]

To define the relevant tile; *Define new layer in layer settings. For example, let the name be mezzanine. *Change the active layer of the tile to intermediate layer. Turn off the tile layer as well. * Enter beams by giving an elevation of -150 cm between columns S01-S07. In the Beam Properties static reinforced concrete tab, check "This beam bears cantilever slab". * Draw a tile edge on the edge limiting the slab at -150 cm elevation. * Adjust the elevation as -150 cm in the flooring settings and place the flooring. Open all layers.