Hello, *In the program, the reinforcements of the console floors are arranged together with the reinforcements of the adjacent floor. For this reason, for example, it would be appropriate to arrange the D09 slab, where the BD01 slab is adjacent in the y direction, to ensure continuity with the reinforcement axes BD01. In addition, while the console floor reinforcement is being arranged, it should be arranged together with the additional reinforcement of the adjacent reinforcement. In the attached example, the reinforcement axis in the y direction of the D09 slab was arranged as above. *The console reinforcement of the calculation axis no. 2 of the BD012 slab is drawn upside down. We took the situation in our notes. You can operate this reinforcement as top+bottom flat reinforcement. (Or you can rotate the reinforcement after breaking one level in the formwork plan and get its symmetry.) Good work.
German 
French 
Spanish 
Portuguese 
Italian 
Arabic 
Russian 
Japanese 
Turkish