About reinforced concrete spiral staircases

[aksmuhendislik]

Hello my dear engineer friends, it is possible to make different stairs that are not in the idecad library with the route object, as it is known, but I could not make the ladder I sent in the appendix. I need urgent help from my dear colleagues :!: (floor height=16.6*21=350)

 

[M. Berat Denli]

Re: About idecad reinforced concrete spiral staircases Hello, You can download the ladder from the attachment. You need to put the ladder stm files in the ladder library. For this, go to the directory where the program is installed and copy the downloaded file into the "C:\Program Files\ideCAD\ideCAD Static 10\stair" stair file. Then start the program. From the Ribbon menu, choose the ladder type you have transferred to the stair file from Ladder -> Ladder Settings -> Stair types. Also attached is the model file. Similar to the example, you can define stairs like this.

 

[aksmuhendislik]

Re: about idecad reinforced concrete spiral staircases

Hi, You can download the ladder from the attachment. You need to put the ladder stm files in the ladder library. For this, go to the directory where the program is installed and click "C :\Program Files\ideCAD\ideCAD Static 10\stair" Copy the file you downloaded into the stair file. Then start the program. From the Ribbon menu, choose the ladder type you have assigned to the stair file from the Ribbon menu -> Ladder Settings -> Ladder types. Also attaches the model file. Similar to the example you can define the stairs in this way.

thank you very much, my teacher berat .... I have another staircase model, I would be happy if you could help me out. Note: h:3m (the first 13 steps are the height of the pier to save the head height, since the building is the entrance staircase will be 17 cm, the last 5 bsmk will be 15.8 cm)