About Laying on Arch Beam.

[Vendetta_1]

Hello. How can I place the flooring on the arch beam in the picture below? I try with the slab edge, but the slab edge cannot catch it due to the beam right end elevation level. If the picture is not visible:

You do not have permission to view link Log in or register now.

You do not have permission to view link Log in or register now.

 

[YasinTezel]

Hello. First of all, define the floor and beams as straight in the plan without giving elevation. You can automatically level the slab and the beams attached to the slab by using the "Bevel Objects" command in the slab toolbar. Each slope surface should be selected separately. Define the slope direction and distance on the plan. Define the difference in elevation between the starting elevation and the two extremes