Ability to select beams according to the entered load

H

huseyinakkus56

New Member
Hello.. In the project, I will increase the beam depths from 50 cm to 55 cm upon the request of the contractor. (The existing molds in their hands are 55cm) The project is large, in this project that I have drawn before, can I find only the beams that I entered the wall load on from the building tree or in another way, or should I find and choose one by one?
 
Hello. If you want to select all the beams, go to perspective screen on the right, switch to solid modeling, press ctrl and a key together, the whole building will be selected. select any beam from the perspective screen and correct it from the properties section. Whatever you fix in the properties fixes all of the beams. You then exit it all with the Esc key. Unver ÖZCAN
 
Understood thanks. Selecting all and lowering the wall height to 2.45 fixed only the beams for which the wall load was defined. This is how it was heard.
 
You must log in or register to reply here.
Back
Top