a problem with the basement curtain

[xenix]

I'm dealing with a trapezoidal project, the sides are adjacent to each other and I need to enter a basement curtain for 2 floors here. Since my foundation is a beam-free raft and this edge is adjacent, the curtains press zero on the foundation, so there is no ampatment margin. While solving the system, I get the error of insufficient reinforcement on some of these curtains and when I look at it visually in 3d, the longitudinal reinforcements are not visible. I couldn't solve it somehow.. can anyone help me about this issue?

 

[Levent Özpak]

If you add your project, we will try to help...

 

[elif ceren ankaralı]

What should I do so that my basement curtains do not appear on the ground floor column application plan when I get a drawing

 

[HakanŞahin]

what should I do so that my basement curtains do not appear on the ground floor column application plan when I get a drawing, urgent answer friends

You have the opportunity to do it in 2 different ways: You can delete the basement curtains in the plan window, after receiving the column application plan, to "undo" to bring back the basement curtains again... While the column application was taking, the basement curtains will not be visible in the drawing because they were deleted... or because each part of the sub-basement curtains is a block in the column application, click, You can delete it as a whole.

 

[elif ceren ankaralı]

THANK YOU SO MUCH HELPED. WELL, IS IT HEALTHIER TO MAKE WATER SCREEN FROM THE PANEL COMMAND?

 

[HakanŞahin]

THANK YOU SO MUCH HELPED SO IT IS HEALTHY TO MAKE WATER SCREEN FROM THE PANEL COMMAND

Yes.. The following link may help you :

You do not have permission to view link Log in or register now.